Triple-IN
GmbH
© Triple-In GmbH • 27/01/2016 11:07:00
PSxxx-20 Laser Scanner User's Manual
28
28
28
28
After disconnecting the sensor, you may use TCP/IP Manager to restore the
Windows standards:
Picture 25 Restore the Network configuration with TCP/IP Manager
1.
Start TCP/IP Manager.
2.
Select in “TCP/IP Settings > Network connection name” the network
adapter connected with the PS Laser Sensor.
3.
“Obtain an IP address automatically” should be checked.
4.
For later use, consider “Network profile > Create a new profile” to save the
setup.
5.
Choose “Apply Settings”.
7.1.3
Triple-IN’s PSControlProgram
Triple-IN’s PSControlProgram is a PC application for controlling the functionality of
Triple-In Laser sensors via Ethernet connection. It makes the user able to set the
user parameters of the sensor, start measurements, record the scans to files or
show it on the chart or in the table.
The program is available on Triple-IN’s webserver.
To install the application please follow the instructions:
1.
Start Windows installation program “Install_PSControlProgram.exe”.
