Triple-IN
GmbH
© Triple-In GmbH • 27/01/2016 11:07:00
PSxxx-20 Laser Scanner User's Manual
34
34
34
34
IMPORTANT
IMPORTANT
IMPORTANT
IMPORTANT
•
The sensor need to be restarted after IP addresses has been changed.
•
The Ethernet interface is disabled while the Terminal mode is active.
The MAC address of the scanner is locally administered by setting the second-
least-significant bit of the most significant byte (the so-called U/L bit, short for
Universal/Local). That address bit is 1, the address is locally administered and the
sensor might be used in local networks only.
7.4.3
Changing the Sensor’s Network Settings using
PSControlProgram
PSControlProgram is useful to change the sensors’s default network settings over
Ethernet:
1.
Start PSControlProgram.
2.
Choose button “Connect” to connect the application with a sensor. The IP
and port dialog appears on the beginning of the connection progress.
3.
Enter the sensor’s standard IP address and the computer’s IP address. Note
that both addresses must be part of the same network.
Picture 28 PSControlProgram network connection dialog
4.
Once the connection has been made, all parameters including the network
settings can be changed on the “Parameters” view.
