Triple-IN
GmbH
© Triple-In GmbH • 27/01/2016 11:07:00
PSxxx-20 Laser Scanner User's Manual
23
23
23
23
Picture 20: Mounting threads at the bottom
•
Ensure during the installation that the entire system is disconnected from
power supply.
•
Mount the sensor at a location where the device is protected from damages,
pollution, high humidity, and rapid temperature changes.
•
Mount the PS Range Modules in a way that it is not exposed to direct sunlight!
•
Route cables such that danger is excluded for persons and all cables are
protected from damages.
•
Follow the safety instructions in the chapter 2.
WARNING
WARNING
WARNING
WARNING
•
Use correct M3 screws only.
•
Apply washers.
•
The sensor must be fixed with all mounting screws.
•
Observe the maximum screw-in depth for the screw holes. The device will be
mechanically destroyed if the maximum screw-in depth is exceeded!
•
Do not extend the maximum tightening torque of 12 Nm.
