Trinnov Audio D-MON 12, Руководство пользователя

Страница: 24 / 95

5.9 EDITING THE SESSION SETTINGS
At the top of the SESSION SETTINGS page, you will see the available SOURCES, MIX BUSES and OUTPUTS for the session. These
determine what resources are available in the main
CONTROLLER
,
SESSION ROUTING
and
MONITORING MIXER
pages as
described earlier (see Using the GUI Pages ).
Possible Operations
For each type of resource:

Click on the
ADD +
button (at the bottom of each section) to configure a new entry - the resource is given a default name
(e.g. Mixbus #16 ) and a generic set of parameters ( Level = 0dB , Format = Stereo , TB = off, MAIN = on, PATCH = on):
The maximum number of SOURCES and OUTPUTS is limited only by the number of physical inputs and outputs.
The maximum number of MIX BUSES depends on your D-Mon model (see 3.2 Comparison of Models ). The available number of
mix channels is stated on-screen. In our example, Available Mix channels: 10/16 means that we have 10 mono mix buses
remaining from the 16 available in our D-Mon 12.

Click on a parameter to edit its value – all parameters are available for all resources, except for talkback which can only be
enabled for mix buses, and levels which can only be adjusted for sources and mix buses. The available parameters are
covered on the next page.

Click on the DELETE symbol (in the right-hand column) to remove a resource.
ATTENTION!
There is no undo for the delete operation, so take care when selecting this symbol! Deleting a SOURCE, MIX BUS or OUTPUT
will remove it from the
CONTROLLER
,
SESSION ROUTING
and
MONITORING MIXER
pages.
Click here to
ADD a resource