Trinnov Audio ALTITUDE 16, Руководство пользователя

Страница: 90 / 164

90
will be redirected and played by the subwoffer(s). You can select the type of filter (Linkwitz-Riley, Bessel or But-
terworth), the cutoff frequency and the slope use by this filter. These settings are only apply to the signal redirect-
ed to the subwoofer(s);
• High Pass – Satellites : This section will delemit the low-end cutoff frequency of the signal send to the satellites.
You can here select the type of filter (Linkwitz-Riley, Bessel or Butterworth), the cutoff frequency and the slope
use by this filter. These settings are only apply to the signal redirected to the Satellites.
!
NOTE: Bass Management mode must be set to On in order for these settings to be taken into account.
Figure 64: Configuring the bass management settings for every speaker
!
IMPORTANT NOTE: If there is no active sub for one or more satellite, the high-pass frequency is still active. If a full-range
speaker is required, set the High-Pass filter type to None and it will disable the filter.