Trinnov Audio ALTITUDE 16, Руководство пользователя

Страница: 82 / 164

82
6.4.12.7 _GENERATE PINK NOISE
The PEQ Editor has its own quick access to the pink generator. Click on the speaker button to generate
pink noise on the selected speaker. Please note that in case of multiway speaker, the pink noise will be
generated on the whole speaker.
6.4.13 _SETTING UP AN ARRAY OF SPEAKERS
With the release of new 3D audio formats, the number of possible speaker’s positions increases con-
siderably. Nevertheless, your video library is surely full of “surround” content (5.1 or 7.1). Furthermore, 3D
formats do not all have the same limitation in terms of simultaneous active speakers.
So it becomes essential to be able to create an array of speakers: use several speakers to play the same
channel. It is also possible to adjust the gain of each speaker of the array to perfectly match the needs of
the Home-Theater; Thereby, the immersion effect is much more impressive!
Similar configurations have been used in commercial cinemas for years.
Once your speaker’s layout has been declared, configured and fully tested, you can now set up your arrays of speak-
ers. The Altitude
16
is able to duplicate the incoming channel from the decoders on several speakers.
The setup of an array has to be done within the Speaker/Room setup tool, using the mapping column of each de-
coder. As explained in the previous chapter Specify a speaker layout, Mapping the channels of different formats
section, each format has its own speaker assignation. You can easily control the number of speakers used by each
decoder. Each column defines the channel used by the associated speaker. In this way, you are able to select the
same channel on several speakers.
In the Speaker/Room setup tool, you can observe five columns giving the details of each decoder’s layout:
• Atmos : Layout used for native Dolby Atmos content and Dolby Surround Upmixer;
• Dolby : Layout used for Legacy Dolby content;
• Auro-3D : Layout used for Native Auro-3D content and Auro-3D Upmixer;
• DTS:X : Layout used for native DTS:X content and Neural:X Upmixer;
• DTS : Layout used for Legacy DTS content.
To specify a speaker layout, please select, in the drop down menu of each speaker, the desired channel that it has to play for each
decoder.
!
IMPORTANT NOTE: DTS:X is limited to 11 different channels. Nevertheless, you can use the arrays to duplicate these 11
channels and use more that 11 speakers.