Trinnov Audio ALTITUDE 16, Руководство пользователя

Страница: 103 / 164

103
Altitude
16
_ USER MANUAL
Figure 78: Tri-amplification
Figure 79: Quadri-amplification
6.8.3.2 _CALIBRATING THE CROSSOVERS
When you system is not yet calibrated, the respond and power & direct are not available, the system will
indicate “Need to calibrate”.
Once you have set the frequency cut and the type of the filter you want to use, click on Calibrate.
The system will calibrate the speaker you have selected or some speakers if they are linked.
!
NOTE: If the system can’t calibrate and show a pop-up message: “crest factor to low” or “unstable position” you can
increase the volume on the left top of the screen.
The following screenshots has been taken with a 5.1 speaker Layout (L, C, R are two-way speakers).