Trinnov Audio ALTITUDE 16, Руководство пользователя

Страница: 160 / 164

160
12 _APPENDIX
12.1 _INSERT AN EXTERNAL STEREO DAC
As the Altitude32 has a flexible and complete range of output types, allowing the use of other DACs when desired.
The analog outputs 1-8 are duplicated on the AES outputs 1-8.
The analog outputs 1-2 are duplicated on the stereo analog SE outputs, AES outputs 1-2, as well as the SPDIF RCA
and optical stereo outputs.
Make sure that the routing is correct.
It’s up to you to choose the best way to feed you Hi-Fi external DAC.
Figure 142: Duplicated Outputs
12.2 _REMOTE START AND STOP
The Altitude
16
can be remotely switched on via a Wake-on-LAN network message. Please ask a certified
installer or an experienced IT technician for technical support.
It can also be switched off remotely over the network using the command provided within our automation protocol
for that purpose, available for download on Trinnov website.
The trigger input can also be used to switch the Altitude
16
on and off from another device.
More information can be provided upon request.
12.3 _AUTOMATION
The Altitude
16
can be remotely controlled from an automation system through RS232 or Ethernet. As an
example, it is possible to create a Crestron® module to remotely control the Altitude
16
via RS232.
The specifications of the protocol are publicly available and can be downloaded from the Support / Download sec-
tion of Trinnov Audio’s website: http://www.trinnov.com
12.4 _SIGNAL FLOW OF THE ALTITUDE
16
12.4.1 _SIGNAL FLOW OF THE ALTITUDE
16
Not shown:
• Input & output routing / Physical inputs & outputs
• Manual input & output EQs