Trinnov Audio ALTITUDE 16, Руководство пользователя

Страница: 116 / 164

116
6.12 _CHECKING THE SPEAKER POSITIONS AFTER CALIBRATION
The Optimizer Settings/Positions page displays the measured speaker locations in real-time during calibration.
Three views are provided:
• Top view: The speakers are seen from above;
• Elevation view: The speakers are seen from the listening point. Relative degrees of elevation and azimuth are
displayed;
• Details view: A table listing the measured distance, elevation, azimuth, level, delay etc…
By default, the Optimizer page always displays the reference speaker positions in green color. These positions are
specified in the template of the initial speaker layout (2.0, 5.1, 7.1 or one of the Atmos, Auro-3D, DTS or Trinnov layouts).
Figure 95: Top view of a 7.1 layout before calibration
As the calibration is performed, the real position of each speaker is displayed after the 3rd MLS burst.
The Top View helps to identify wrong speaker placements. It might be necessary to recalibrate if the microphone
is not perfectly pointed towards the center of the front stage, but that would only impact the visual representation.
Figure 96: top view of a 7.1.4 after calibration
This view also provides the RT60 on the top left corner of the page.
• Overlay both representations with the Scale and Ref. Radius options to verify the compliance with the
recommended placements.