Trinnov Audio ALTITUDE 16, Руководство пользователя

Страница: 52 / 164

52
• L,R,C
• L,R,C,Lfe
• L,R,C,Lfe,Ls,Rs
• L,R,C,Lfe,Ls,Rs,Lrs,Rrs
• Listening Format : Select the default format you want to use with this source. The Altitude
16
will be forced to
decode and upmix (if possible) in this format.
• Auto: Will automatically upmix in the corresponding format
• Dolby Surround: Will force the Dolby Surround upmix
• Neural:X: Will force the DTS Neural:X upmix
• Auro-3D: Will force the Auro-3D upmix.
• Native: keeps the incoming format from the source
• Upmix on native: Will automatically upmix in the corresponding format with the Legacy layout
• Legacy: Will only use the bed (5.1 or 7.1)
• Optimizer Preset : This parameter allows you to link a source to one of the presets you created.
• No Change: no preset is associated to this source configuration;
• 1 to 29: choose one of the 29 presets to load a preset when this source is selected.
• The following parameters are set, by default, to use the settings from the current preset:
• Source (the format of the source)
• Remapping Mode
For the following parameters, it is possible to choose between No Change, As in preset or to select one of the EQ
created and saved in the Processor/Output page during the fine tuning:
• FIR EQ: Select a FIR EQ that has been saved in the Processor/Output page.
• User EQ : Select a FIR EQ that has been saved in the Processor/Output page.
• Input Levels
• Output Delays
The Master Level can be left Unchanged (default setting) or set to a specific level.
Power-on Default : the selected source can be set as the default configuration to be loaded at power-on. Alterna-
tively, you can check the option Use last loaded source as power-on default source in order to keep the source that
was used before the last shut-down.