Revision C August 2014
www.trinityhighway.com
3
All rights in copyright reserved
Customer Service Contacts
Trinity Highway International is committed to the highest level of customer service. Feedback
regarding the QuadGuard
®
CEN, its assembly procedures, supporting documentation, and
performance is always welcome. Additional information can be obtained from the contact
information below:
Trinity Highway Products, LLC dba
Trinity Highway International
Telephone:
+1 (214) 589-8140
E-mail:
Website:
www.trinityhighway.com
Important Introductory Notes
Proper assembly of the QuadGuard
®
CEN is critical to achieve tested performance that has
been evaluated and accepted per EN 1317-3. These instructions should be read in their entirety
and understood before assembling the QuadGuard
®
CEN. These instructions are to be used
only in conjunction with the assembly of the QuadGuard
®
CEN and are for standard assemblies
only as specified by the appropriate highway authority. If you need additional information, or
have questions about the QuadGuard
®
CEN, please contact the highway authority that has
planned and specified this assembly and, if needed, contact the Trinity Highway International
Customer Service Department. This product must be assembled in the location specified by the
appropriate highway authority. If there are deviations, alterations, or departures from the
assembly protocol specified in this Manual, the device may not perform as it was tested and
accepted.
This system, like other Trinity Highway International systems, has been crash tested pursuant to
EN 1317-3 mandated criteria.
Important:
DO NOT
use any component part that has not been specifically
crash tested and/or approved for this system during the assembly or repair of this
system.
