Trilliant SecureMesh CONN-2000, Руководство по установке

Страница: 27 / 56

Notice: The contents of this document are proprietary and confidential and the property of Trilliant Holdings, Inc., its susidiaries, affiliates, and/or
licensors. This document is provided subject to the confidentiality obligations set forth in the agreement between your company and Trilliant. The contents
may not be used or disclosed without the express written consent of Trilliant.
27
Installation Guide for SecureMesh® CONN-2000 - PL-0689A
Chapter 4. Mount the Connector
This chapter includes the steps to mount the CONN-2000 to a pole, and examples.
Attach the Connector to a Pole
1. Attach the L-bracket to the CONN-2000, using the four hex head bolts and
lock washers supplied in the hardware kit (see Figure 3 and Figure 5 ).
2. Affix the U-bolt and serrated gripper for the CONN-2000 through the slots in
the fixed part of the adjustable L-bracket, as shown in Figure 11 .
3. Mount this assembly on to the pole, as shown in Figure 12 . Ensure the ser-
rated edge of the gripper bracket is against the pole.
Figure 11: The Adjustable Bracket
4. Align the device with the target using line of site methods. Adjust the angle of
the device as needed to face the target. Refer to Figure 11 , Figure 12 , and Fig-
ure 13 .
5. Cable the system as appropriate. Refer to Figure 2 for guidance.