Trilliant SecureMesh CONN-2000, Руководство по установке

Страница: 25 / 56

Notice: The contents of this document are proprietary and confidential and the property of Trilliant Holdings, Inc., its susidiaries, affiliates, and/or
licensors. This document is provided subject to the confidentiality obligations set forth in the agreement between your company and Trilliant. The contents
may not be used or disclosed without the express written consent of Trilliant.
25
Installation Guide for SecureMesh® CONN-2000 - PL-0689A
1. If a connector cover is present on the cable, remove it.
2. With a sharp tool such as an Exacto knife, make a small hole like an “x” in the
black gasket of the suppressor.
Note: Ensure the hole is only large enough for the wires to feed
through, and is snug. If the hole is not snug, ants or small bugs might
enter and create a nest, which can cause future issues.
Figure 9: Citel Surge Suppressor with Gasket and Cables
Attach the Surge Suppressor
Prepare the mounting location at the site, then mount the CONN-2000.
1. Check that the mounting pole is level and plumb. Follow the conventions for
the site.