Trilliant SecureMesh CONN-2000, Руководство по установке

Страница: 28 / 56

Notice: The contents of this document are proprietary and confidential and the property of Trilliant Holdings, Inc., its susidiaries, affiliates, and/or
licensors. This document is provided subject to the confidentiality obligations set forth in the agreement between your company and Trilliant. The contents
may not be used or disclosed without the express written consent of Trilliant.
28
Installation Guide for SecureMesh® CONN-2000 - PL-0689A
6. Ensure there is a drip loop between the surge suppressor and the CONN-
2000.
l
Keep the length of cable #1 (see Figure 2 ) to a minimum while forming a
drip loop between the CONN-2000 and the surge suppressor.
7. Attach the ground wire from the surge protector to the ground clamp or the site
ground point.
Note: The maximum allowable total Ethernet cable length should not
exceed 330 ft. (100 m).
Examples of the Mounted Connector
See Figure 12 , Figure 13 , and Figure 14 for examples of the CONN-2000 mounted on
a pole.