Trilliant SecureMesh CONN-2000, Руководство по установке

Страница: 18 / 56

Notice: The contents of this document are proprietary and confidential and the property of Trilliant Holdings, Inc., its susidiaries, affiliates, and/or
licensors. This document is provided subject to the confidentiality obligations set forth in the agreement between your company and Trilliant. The contents
may not be used or disclosed without the express written consent of Trilliant.
18
Installation Guide for SecureMesh® CONN-2000 - PL-0689A
Guidelines
To ensure optimal reliability, properly ground the surge suppressors. Use a 10 AWG
or larger wire to connect it to the ground point on the structure. Figure 2 shows a typ-
ical installation with ground wires at the surge suppressors (see #2 and #4 Figure 2;
both needing grounding or earthing. Your installation may vary.
Figure 2: Typical System Cabling Diagram for the CONN-2000 Mounted on a Utility
Pole
Note: In some cases, the metal utility pole may be a good earth
ground, and can be used instead of a driven ground rod. Ground the
surge suppressor using the green 10 AWG wire to the conductive pole
in these cases.