Trilithic EASy-PLUS, Руководство по эксплуатации

Страница: 93 / 114

EASyPLUS Encoder/Decoder - Operation Manual V8.09
91
3. In the Main TTLs & Contact Closures group, select the control lines needed to
replace normal program audio.
4. In the Audio Message group, select the desired audio type.
5. Click the Test Audio button. The selected control lines will activate
and the EAS audio will play.
6. Click the Stop Test button when finished (the Test Audio button will change to Stop
Test when the audio is activated).
7. After all audio tests have been completed, click the Close button to return to the
normal Utilities tab.
Test the Audio Function
The EASyPLUS audio tests allow an operator to activate specific control lines while
sending EAS tones or recorded voice messages. In order to perform these tests, the
operator should know which TTL and contact closures (if any) are connected to the audio
substitution equipment.
1. If user audio or EAS audio will be used to perform the tests, refer to the sections
Chapter 5: EASyPLUS Configuration, The Audio Tab .
2. On the Utilities tab, click the Test Audio button.
The Utilities window will refresh to display the Audio Test window.