Trilithic EASy-PLUS, Руководство по эксплуатации

Страница: 82 / 114

EASyPLUS Encoder/Decoder - Operation Manual V8.09
80
After changing SNMP settings, the EASyPLUS must be
rebooted for the changes to take effect.
Adding an SNMP Server
To add an SNMP server to the list of SNMP Management Servers , perform the
following procedure.
1. Click the
Add button.
2. In the pop-up Add an SNMP Server
window, enter the IP address of the
SNMP server in the IP Address text box.
3. Enter the UDP port that will receive traps
in the Trap Port text box (the default
value is 162).
4. Select the Enable Heartbeat Trap
Messages
check box to enable periodic
traps, indicating the EASyPLUS is online
and functioning. The heartbeat trap
frequency averages two traps per minute.
5. Select the Enable Fault & Status Trap Messages check box to enable fault and
status trap messages. Refer to the current MIB for details.
6. Select the Enable EAS Activation Trap Messages check box to enable EAS
activation traps. EAS activation trap messages are used to inform operators that the
EAS system has been activated.
7. Select the Enable EAS Logging Trap Messages check box to enable EAS logging
traps, which occur when the EASyPLUS saves a new log to its internal memory.
The trap messages can be used to provide a backup of the EAS log in near real-
time.
8. Click the
OK
button to complete the process.