Trilithic EASy-PLUS, Руководство по эксплуатации

Страница: 56 / 114

EASyPLUS Encoder/Decoder - Operation Manual V8.09
54
The Record/Playback Audio Files group is used to record audio messages in the
EASyPLUS. Through this group, audio messages can also be played back to verify the
content and quality of the message.
•
Audio File
- Use this pull-down list to select the audio storage section to record or play
back. The EAS audio selection is used for EAS events. The Tune-To audio selection is
used during Tune-To messages. The User 2 and User 3 audio selections are used with
Custom Messaging software and telephone dial-in.
• Source - Select the source (microphone or one of the six internal audio inputs) from
which the audio will be recorded.
• Record - Click the Record button and speak into the microphone on the front of the
EASyPLUS to record a message from the front panel microphone. While the message
is being recorded, the Record button will change to a Stop button. Click the Stop
button to end the audio tone playback.
• Playback - Click this button to play the audio message that has been recorded. While
the audio message is playing, the
Playback
button will change to a
Stop
button. Click
the Stop button to end the audio message playback.
•
Upload
- Click this button to upload an audio file (WAV format) via Ethernet.
Verifying Radio Reception
1. On the Audio tab , set the Speaker Volume to the maximum value by moving the slider
to the top of the scale.
2. In the Source pull-down list, below the Speaker Volume slider, select the audio channel
to be verified.
3. Click the Program Audio Configuration button to write the new settings to the
EASyPLUS.
4. Listen to verify that the audio from the radio is clear. The clarity of this audio is
fundamental to the operation of the EASyPLUS.