Trilithic EASy-PLUS, Руководство по эксплуатации

Страница: 25 / 114

EASyPLUS Encoder/Decoder - Operation Manual V8.09
23
Chapter 4
4. Initial Configuration
Starting the EASyPLUS Configuration software
To start the EASyPLUS Configuration software, double-click the EASyPLUS icon on the
desktop, or click the Windows Start button, All Programs group, Trilithic group, EASyPLUS
group, then click the EASyPLUS program icon.
If the EASyPLUS Configuration software is being used to
maintain multiple EASyPLUS Encoder/Decoder configurations,
select the appropriate system using the Select button on the
Main tab before attempting to connect to a remote system.
Connecting the EASyPLUS to a Computer
Before connecting the EASyPLUS Encoder/Decoder to the computer on which the EASyPLUS
Configuration software is installed, determine which type of connection will be used between
the EASyPLUS and the host computer: serial, Ethernet, or modem. Refer to the following
procedures for instructions in establishing a connection between the EASyPLUS and the host
computer.
After upgrading the firmware from a version earlier than 7.00
a default administrator user account will be setup with the
password set to “Administrator” and the PIN set to “2345”.
Before communicating with an EASyPLUS unit, enter the default Password of
“Administrator” . After the initial configuration is complete, the password can be changed.