Trilithic EASy-PLUS, Руководство по эксплуатации

Страница: 67 / 114

EASyPLUS Encoder/Decoder - Operation Manual V8.09
65
Adding an SCTE-18 Device
To add an SCTE-18 device to the list of devices, perform the following procedure.
1. Click the Add button.
2. In the pop-up Add an SCTE-
18 Recipient window, enter a
name to identify the device in
the Name text box.
3. Select the data transport
protocol from the Transport
Type pull-down list.
4. Enter the IP address of the
SCTE-18 device in the IP
Address text box.
5. Enter the TCP/UDP Port
number (the default setting is
5050 ).
6. Enter the PID (packet ID) for
the SCTE-18 message (if using
MPEG packets).
7. Select the interval for message repeats with the Repeat Rate control box (set the
value to 0 for no repeats).
8. Use the Details Source control box to provide the out of band source information
for the EAS details channel.
9. Use the Audio Source control box to provide the information contained in the
“audio_OOB_source_ID” field of the SCTE-18 message. Select the source ID
from 0 to 65535 . This value is typically set to 0 .
10. Use the
Major Channel
control box to provide the major channel number of the
EAS audio/video.
11. Use the
Minor Channel
control box to provide the minor channel number of the
EAS audio/video.
12. Select the
Send Message Twice
check box to send the EAS message to the
SCTE-18 device twice, with a sequence_number increment in between sends.
This helps to insure that recipient devices do not discard the alert due to a
duplicate sequence_number.