4-15
4-15
4-15
4-15
4-15
Using the SETUP Program
4
When you see "Confirm New Password", press Enter again.
5
When you see the following message, press Enter.
Both Passwords Uninstalled
or
User Password Uninstalled
To change the current password, type your new password before pressing Enter on
steps 3 and 4.
Accessing Your Current Password
If you forget your current password and cannot use your computer or run SETUP,
follow these steps:
1
Turn off the computer and disable the password function by setting jumper J4 to
the disable position (1-2).
2
Turn on the computer. You will not see the prompt that asks you to enter your
password when you turn on the computer or run SETUP.
3
If you want to set a new password, turn off the computer and enable the password
function by setting jumper J4 to the enable position (2-3).
4
Turn on the computer. As soon as the "Hit Del if you want to run SETUP"
message appears on the screen, press the Del key.
If you set a new password, the prompt that asks you to enter the password will appear
on the screen when you turn on or reset the computer or run SETUP.
If you did not set a new password, you would immediately use your system.
If you attempt to set a new password after you set jumper J4 to 1-2 to disable your
password, the password will not be saved to CMOS RAM.
