manualshive.com logo in svg

TRIGEM TPS-7500, Инструкция по установке и обслуживанию

Поделиться
Скачать
TRIGEM TPS-7500 Скачать руководство пользователя страница 107

8-1

8-1

8-1

8-1

8-1

Installing the USB Supplement

Installing the USB Supplement

Installing the USB Supplement

Chapter 8

Your system comes with the Windows 95 OSR2.1 CD that includes the Microsoft®
USB Supplement for Windows®  95. If you (re)install Windows 95 and there are
USB devices connected to your system, you must install the Microsoft USB
Supplement for Windows 95.

Installing the USB Supplement for Windows 95

Follow these steps to install the USB Supplement:

1  

Insert the Microsoft Windows 95 OSR2.1 CD into your CD-ROM drive.

2  

Click the Start button and then click Run.

3  

Click Browse, select D:\OTHER\USB\USBSUPP.EXE, and click Open. Then

click OK.

4  

When prompted with "Install Microsoft USB Supplement to your system?" click

Yes.

5  

At the license agreement screen, review the agreement and then click Yes to
continue.

The installation program runs the ScanDisk utility to check the hard disk drive for
errors, and then copies the USB Supplement files to the drive. When all files are
copied, the following message is displayed:

Microsoft USB Support Installed! Setup will now restart your system to
complete setup. Please close any applications now.

Содержание TPS-7500


































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды