– 44 –
– 45 –
EN
4.2) Requirements
Note: The "
A
ggregAtion
" and "
m
irroring
" coupling modes are only supported
under Windows® 2000 , XP and Vista.
• In order to set up one of the 3 coupling modes for the
DataStation
maxi z.ul
, you must have entered the write key
(KEY) for all of the affected drives. You can do this in the "
t
rek
s
tor
ndAs
d
eviCe
m
AnAgement
" under the "
P
roPerties
" menu item of the respective device.
• The drives cannot be operated in 2 different modes at the same time.
• Unmount all
DataStation
maxi z.ul
, which are to be
bound, on all of the PCs in your network.
• Other users can re-mount the bound
DataStation
maxi z.ul
after the coupling has been set up and the
DataStation
maxi z.ul
has been partitioned and formatted.
Note: In the "
m
irroring
" and "
s
tripe
" coupling modes, the capacity of the
secondary
DataStation
maxi z.ul
must be at least the same as
or greater than the primary
DataStation
maxi z.ul
.
4.3) Setting up the coupling mode
NOTE: Back up all the data on your hard disk before using your hard disk in a
coupling mode. When setting up a coupling mode, ALL data on ALL associated
hard disks are irrevocably lost.
• Click on "
s
tArt
"
"
P
rogrAms
"
"
t
rek
s
tor
ndAs
softwAre
"
"
t
rek
s
tor
ndAs
b
ind
m
AnAgement
".
• Click on the "
b
ind
" button to start the Assistant for setting up a
coupling mode. Then click on the "
n
ext
" button.
• Select from the different coupling modes and the number of drives to be bound.
