1
3
2
4
1
3
2
4
19
ENGLISH
Instructions for Use
To increase assistance, press button ‘+’. For assistance level 1, press once. Press again for more
assistance. For less assistance press button ‘-’. When there is no assistance level shown and the
bicycle icon is visible on the screen, there is no assistance. Pedaling is then the same as on a normal
bicycle. To switch from any level of regeneration to the first assist level, press and hold the ‘+‘ button.
Notice: It is strongly advised to ride away in a straight line when an assistance level is selected.
Never select assistance level 3 or 4 during maneuvering or riding away in a tight corner. The powerful
reaction of motor might take you unawares.
• Regeneration
When the bicycle generates electricity for the battery, the system is in generation mode. The motor
then works as a dynamo. There are four levels of regeneration. The level of assistance is shown by
the bar graph on the left, below the digits for speed. The narrow graph on the display shows the
amount of energy delivered to the battery.
To increase the regeneration level, press button ‘
-
’. For regenerative level 1 press once. Press again
to increase the regeneration level to a higher level. For a lower regeneration level press button ‘
+
’.
To switch from any level of assistance to the first regenerative level, press and hold the ‘-’ button.
When the rear brake lever is pulled, the system always switches to generating. The arrow and G
will show in the display.
• Distance, Odometer, Chronometer, Average speed
The bottom of the display shows distance, odometer, chronometer, and average speed. Press
button to switch modes. To reset distance, chronometer, or average speed, keep this button
pressed for 2 seconds.
