Pag. 29
DUALCOM-8 INSTALLATION MANUAL
ENGLISH
07.01 Sending SMS message to report problem (01) see report table on page 28 (GSM LINE
FAULURE )
In the menu for the SMS report transmission of
,
press the digits
【
01
】
+
【
#
】
or flow up and down in
the menu with the keys:
【
】
or
【
】
On the display appears:
Set all the parameters for the report transmissions, and at the end press the key
【
#
】
to confirm.
Be sure to check all setting to avoid malfunction of the control panel.
Programming example :
REPORT for 01 must be set:
1. (1) Transmission to the first telephone number
2. (0) NO transmission to the second telephone number
3. (0) NO transmission to the third telephone number
4. (0) NO transmission to the fourth telephone number
5 (1) Transmission to the fifth telephone number
After having set the REPORT parameters press
【
#
】
to confirm.
07.02-24 To set the 2nd to the 15th REPORT to transmit by SMS message.
Proceed as described in section 07.01 by pressing the report number first as shown below:
Press digits
【
(02 to 25)
】
+
【
#
】
or flow up and down in the menu with the keys:
【
】
or
【
】
Then proceed as described in section 07.01.
Other report
<01>10001
REPORT SMS TRANSMISSION
(1)
First number
0 = no tranmission
[1]
= transmission
(2)
Second number
[0]
=no transmission
1 = transmission
(3)
Third number
[0]
=no transmission
1 = transmission
(4)
Forth number
[0]
=no transmission
1= transmission
(5)
Fifth number
0=no transmission
[1]
= transmission
REPORT no.
Other report
<01>10001
Assigned number*
(Table Report)
