Pag. 15
DUALCOM-8 INSTALLATION MANUAL
ENGLISH
02.Telephone number management
To enter the telephone programming mode press the keys shown below:
On the display appears:
While in this mode, you may program:
•
How the messages must be sent (7 methods);
•
The telephone numbers to be memorized (up to 5);
•
Select the Tel. Numbers which will manage the panels remote functions (up to 3)
You may flow up or down in the menu by pressing the keys:
To go to the next page.
To go to the previous page.
Example
：
While in the telephone management menu press the digits
【
03
】
+
【
#
】
to select how
you wish to send the 3rd number and program a new telephone number.
02.01 The first number for the alarm trigger transmission
In the principle telephone
number management menu, press the
digits
【
01
】
+
【
#
】
on the
display will appear:
Enter the transmission method and the number with international code followed by
【
#
】
(maximum numbers digest that can be memorized are 16). The keypad does not have a “pause”
button and for this reason it
may not be installed with a Tele-
phone Exchange System.
Example:
Telephone
Telephone
<01>
Telephone
<01>4003934722000200
Telephone number that may be up to
maximum 16 digits with International
code included
Position
In this case the 1st
number memorized
Transmission method based on end user
needs. In this case 4: which is an SMS
message sent over the GSM network.
See table on page 16
【
】+【
02
】+【#】
F
