Pag. 11
DUALCOM-8 INSTALLATION MANUAL
ENGLISH
00. TO ENTER INTO PROGRAMMING MODE
Before entering into programming mode, be sure that the control panel is disarmed and that the LED
for “Areas 1 & 2” , “TAMPER”, “FIRE” e “ALARM 1 & 2” are all “OFF”. On the keypad KP-8R press
the buttons 012345 (this is the factory programmed installer code) and follow by (see blow:)
On the Display will appear:
01.
Password Management
While in the programming mode press the keys:
On the display will appear:
Now you may program the following:
•
The installer code.
•
Security level code (up to 6)
•
Operators password (up to 8).
You may flow through the menu by pressing the keys:
To go to the next page.
To return to the previous page.
In alternative, you must press the code related to the programming address of submenu
Example
：
In the principle password management menu you my press
【
03
】
+
【
#
】
to program the
level of security and the password of the operator number 2.
PROGRAMMING
【
012345
】+【*】+【
0
】+【#】
【
】+【
01
】+【#】
Password
F
