Installation (for qualified installers only)
11
© Travis Industries
4080123
100-01174_002
Face Sizing
Face
Height
Width
Notes
Rawhide
27”
35-3/4”
Victorian
27”
35-3/4”
Rosario
26”
35-3/4”
Cambridge
25-7/8”
37-5/8”
Craftsman
27-1/2”
36”
Bungalow
27”
32-3/4”
Classic Arched, Artisan
26-1/2”
34-3/4”
Side begins arch 3-1/2” below top - 45” radius
Metropolitan
26-1/2”
34-3/4”
Architectural Series
27-7/8”
33-5/8”
Discovery
26’
35-3/4’
Wilmington
27”
36-1/8”
Face Mounting Brackets – Arched, Artisan, Metropolitan, Victorian Lace
Some Arched, Artisan, Metropolitan and Victorian Lace Faces include old brackets that will not
mount to the heater (see illustration below). For these faces, make sure to use the new mounting
brackets (either included with the heater or available through your dealer - SKU 225-20054).
WARNING
: When attaching the Victorian Lace Face,
do not over-tighten the screws
. Over-
tightening the screws may damage the face – simply tighten the screws until they contact the face.
New Brackets
Old Brackets
Install the face mounting
brackets with the included nuts.
NOTE: The brackets install into the
lower pair of holes on the insert.
NOTE: The brackets
install with this pair of
closely spaced flanges at
the top.
