TransTel Communications Lynx DK6 Series, Руководство по программированию

Страница: 47 / 185

LYNX Plus Programming Manual Rev 2.1c Page
47
Program 03-01-IP : Door Phone Ringing Assignment
03-01-IP Door
11 12 13 14 15 IP = 01-26
Assigned station number.
General:
This program assigns the Door Phone/s to ring the programmed stations.
Description:
1. To assign an ACP or digital door phone to follow Mode 03 it must be set to “d” in mode 46-st-07.
Otherwise it will ring the stations assigned in the Hunt Group allocated in mode 46-st-07
2. Twenty six stations can be assigned to ring for the door phone.
3. To clear all entries press
[REDIAL]
.
4. Door phone ringing time is set in Mode 05-11-07.
5. Door Relay Unlock Time is set in Mode 05-12-04.
6. Door phone Ringing frequency is set in Mode 05-03-08.
Program 04-gp-IP : Console Assignment
04-gp-IP Console
11 00 00 00 gp = Station group (01-08) IP = (Item Pointer) 01-04
Assigned station number (2 to 4 digits)
General:
This program permits the selection of the consoles in each station group. Consoles are stations that can
program System speed dials, Record system Voice messages, receive hold recalls and ring when callers
dial 9/0 for the operator. For DISA calls only the ring type is Common Audible otherwise Linear is standard
Description:
1. There are 8 console groups available. Four stations can be set in each group
2. Assign either a station or the pilot number of a hunting group as the console(s).
4. The first assigned station is the master console if a pilot number is assigned here.
5. Only the Console can operate some special Voice Mail features.
6. To clear all entries press
[REDIAL]
. Do this in ALL unused groups.