Page
68
Program 05-09-IP : System Timing Parameters – 09
05-09-IP SYS PAR
0 1 0 0 0 1 5 2
IP =
Item Pointer (01-08)
Value for each Item
IP
Value
Default
Item Description
01
0-1
0=
Reserved
02
0-1
1= Enable
Busy Console Queuing (Intercom Calls)
03
0-9
4= Break Time over 320 ms will
recognize a formal CFS.
Clear Forward Signal (Loop Disconnect)
Detection
04
0-9
0=Disable
DISA Busy Tone Detection
05
0-
0=
Reserved
06
0-9
3=15 Sec
ACD-1 Enable Time
07
0-9
6= 30 sec
ACD-1 Segment 2 Recall Time
08
0-9
2=10 min
ACD-1 Release Time
02. Console Queuing
This feature enables the busy console(s) to have an intercom call(s) queued to it(them). If the station dials
the operator (by 0 or 9) and all the consoles are busy, the system will put this call in the queue to wait for
the operators to be free. The calling station will hear ring back tone instead of busy tone and the first
operator in the group will receive the Busy Remind Signal. The first operator to go on-hook will receive the
call.
IP \ Value
0
1
05-09-02
Disable
Enable
03. Clear Forward Signal (Loop Disconnect) Detection
Clear Forward Signal (CFS) is a signal sent in the forward direction to terminate a call (or call attempt) so
that the associated circuits can be released. This signal is normally originated when the calling party
hangs-up the phone.
Some Central Office provides this kind of signal by breaking (disconnecting) the Loop circuit for a period
of time and then making (connecting) again. This Break time period is varied at different CO line and
some CO line even doesn’t offer this feature.
The parameter in this mode is the minimum Break time for formal Clear Forward Signal, so that phone
system can release the line back to idle status.
Break Time Table :
IP
Value Value Description
05-09-03
0
No need to detect Clear Forward Signal
05-09-03
1
Break Time over 80 ms will recognize a formal CFS.
05-09-03
2
Break Time over 160 ms will recognize a formal CFS.
05-09-03
3
Break Time over 240 ms will recognize a formal CFS.
05-09-03
4
Break Time over 320 ms will recognize a formal CFS.
05-09-03
5
Break Time over 400 ms will recognize a formal CFS.
05-09-03
6
Break Time over 480 ms will recognize a formal CFS.
05-09-03
7
Break Time over 560 ms will recognize a formal CFS.
05-09-03
8
Break Time over 640 ms will recognize a formal CFS.
05-09-03
9
Break Time over 720 ms will recognize a formal CFS.
Содержание Lynx DK6 Series
