Page
36
Single Line Telephone (connected to G1K-MBU)
Station cables can enter from the bottom of the KSU. Remove the cover and route the station cable
through the hole. Terminate the station wires with the connectors that are provided. The stations will
connect to the KSU as shown on the main panel (above) on connector locations ST5~ST8
(port15~port18) or ST9~ST12 (port19~port22) (Needs G1K-TLU installed).
Connect Tip terminal with GRN terminal (screws) of the modular jack, Ring with RED.
There is no polarity requirement on Tip and Ring.
2-conductor wiring is required for Single Line Telephones.
CO/PABX Connections
Make your CO line connection to the telephone company on this connector. Pins 3 and 4 of the
connector are for the CO line.
RJ-11C (2 wire) modular connector is required.
2-conductor wiring is required.
Music on Hold Connection
•
Conn
ect the (optional) external music source to the external Music input labeled on the KSU.
•
Use a 1/8” mini plug to connect the music source to the KSU via an approved line isolation unit.
Содержание Lynx DK6 Series
