TransTel Communications Lynx DK6 Series, Руководство по программированию

Страница: 71 / 185

LYNX Plus Programming Manual Rev 2.1c Page
71
Program 05-10-IP : System Timing Parameters – 10
05-10-IP SYS PAR
d d d d d d d d
IP =Item Pointer (01-08)
Value for each Item
IP Value Default Item Description
01 0-9,*,#,p,d d= No Digit Leading Digit 1 For Voice Mail Forwarding
02 0-9,*,#,p,d d= No Digit Leading Digit 2 For Voice Mail Forwarding
03 0-9,*,#,p,d d= No Digit Leading Digit 3 For Voice Mail Forwarding
04 0-9,*,#,p,d d= No Digit Leading Digit 4 For Voice Mail Forwarding
05 0-9,*,#,p,d d= No Digit Leading Digit 5 For Voice Mail Forwarding
06 0-9,*,#,p,d d= No Digit Leading Digit 6 For Voice Mail Forwarding
07 0-9,*,#,p,d d= No Digit Leading Digit 7 For Voice Mail Forwarding
08 0-9,*,#,p,d d= No Digit Leading Digit 8 For Voice Mail Forwarding
Description:
Important Note:
This page is irrelevant when using the built-in Voice Mail in the Lynx. It is only used
when Lynx is connected to an external Voice Mail device.
This parameter allows the system to insert digits before the call forwarded station number when the call
forward is received by the voice mail port if Standard Protocol is selected. If the station numbering is only
2 or 3 digits the system will insert additional digits if the Voice Mail requires more. The last digits of the
voice mail box number will still have to be the same as the station numbering for correct recognition. The
HOLD key can be used to insert a pause in the DTMF tone sending and will display as a (p). The DND key
is no digits sent and is shown as (d).
The possible value for each leading digit is 0 to 9, *, #, Pause (enter by pressing HOLD key) and No Digit
(enter by pressing DND key)
Example:
The system
is set to 2 digit numbering but the voice mail requires 4 digits. The voice mail also requires a
pause between answering the call and the tones being sent. Set this parameter to the following
05-10-IP SYS PAR
p 1 1 d d d d d
When the call forwarded station 34 is answered by the voice mail port after the pause time the digits 1134
will be sent to the port by the system. If station 34's voice mail box is 1134 then the mailbox number 1134
will be automatically opened by the tones.
There are 2 different Voice Mail Protocols available in the
TRANSTEL
series depending on the setting in
Mode 05-12-05. If this mode is set to 0 then the Protocol will be the leading digits entered in this Mode
plus the Station Number of the forwarded station. If Mode 05-12-05 is set to 1 then the Enhanced Protocol
shown on the following page will be used.