Transtech Transputer, Руководство пользователя

Страница: 52 / 200

Example
44
Transputer Motherboard User Manual TMB M 711
example given here shows to configure a system consisting of two
TMB03s in the same PC. In this case:
• the two boards must have different addresses
• one board must be slaved to the other
• the default pipeline needs to be connected
Set the jumpers as follows:
Fit TRAMs in all sites (using pipe-jumpers on unused slots and on the
inactive slots of TRAMs larger than size 1). No subsystem pins are
needed.
Fit the boards in your PC, and using the “hedgehog” breakout
boards, make the following connections:
Power on the PC and run
check
.
When connecting the TMB03 to motherboards which include
electronic link switching, then the TMB03’s PipeHead could be used
as ConfigDown (i.e. it may be connected to ConfigUp of the
configurable motherboard).
Jumper First board Second board
IBM/UP out in
Mod0SS in in
AS0 in out
AS1 in in
10MB/s out out
M/S M M
Table 8: Jumper settings for two TMB03s
Cable First board Second board
Reset Cable Down Up
Link Cable Pipetail (L10) Pipehead (L0)
Table 9: Connections between TMB03s