manualshive.com logo in svg

Transtech Transputer, Руководство пользователя

Поделиться
Скачать
Transtech Transputer Скачать руководство пользователя страница 195

Trouble-shooting

TMB M 711

Transputer Motherboard User Manual

187

12.2 PC Host Interface

If

check

 cannot find any transputers, then the problem is may be

with the operation of the host interface. It is best to remove all non-
essential hardware and software from the machine, repeat the test.
Then re-introduce other devices one at a time, resolving any clashes
that occur. If you are using more than one transputer card, start with
just one card, then introduce the others.

You may need to change the IO address of the transputer card.
Remember to update the environment variable

TRANSPUTER

 and the

database

\tps\lib\dos.db

 before running

check

 again.

Note that there are many different versions of check and iserver,
released by many organizations. Check that you have the

\tps\bin

 directory in your path ahead of any other transputer-

related software (e.g., the Inmos toolset).

Содержание Transputer









































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды