Transtech Transputer, Руководство пользователя

Страница: 169 / 200

Utilities Software
TMB M 711 Transputer Motherboard User Manual
161
# Part rate Mb Bt [ Link0 Link1 Link2 Link3 ]
0 T805b-25 1.52 0 [ HOST 1:1 3:1 ... ]
1 T225c-20 1.74 1 [ ... 0:1 ... C004 ]
3 T805b-25 1.77 1 [ ... 0:2 4:1 ... ]
4 T805b-25 1.75 1 [ ... 3:2 5:1 ... ]
5 T805b-25 1.75 1 [ ... 4:2 ... ... ]
The C004 link switch settings can be determined using the
check /cl
option and the results stored in the file
wire
:
C:\TPS>check /cl > wire
C:\TPS>type wire
Using tmb17 check 3.0.3
# Part rate Mb Bt [ Link0 Link1 Link2 Link3 ]
0 T805b-25 1.52 0 [ HOST 1:1 3:1 ... ]
1 T225c-20 1.74 1 [ ... 0:1 ... 2:C ]
2 C004b ()
3 T805b-25 1.75 1 [ ... 0:2 4:1 ... ]
4 T805b-25 1.75 1 [ ... 3:2 5:1 ... ]
5 T805b-25 1.75 1 [ ... 4:2 ... ... ]
In this case, no link switch settings have been made.
To create a link 3 to link 0 pipeline between the TRAMs, then C004
link 10 should be connected to link 1, link 11 to link 2 and link 12 to
link 3. See figure 96 for details.
Edit the file
wire
and change the line for the C004 link switch to:
2 C004b (10-1 11-2 12-3 )
This amended file can then be used with the
check /cs
option to set
the C004 link switch:
C:\TPS>check /cs < wire
Using tmb17 check 3.0.3
# Part rate Mb Bt [ Link0 Link1 Link2 Link3 ] CHANGES
0 T805b-25 1.52 0 [ HOST 1:1 3:1 ... ]
1 T225c-20 1.74 1 [ ... 0:1 ... 2:C ]
2 C004b [ -ABC---- --123--- -------- -------- ]
3 T805b-25 1.75 1 [ ... 0:2 4:1 ... ]
4 T805b-25 1.75 1 [ ... 3:2 5:1 ... ]
5 T805b-25 1.75 1 [ ... 4:2 ... ... ]
C:\TPS>check