3000A SERIES CALIBRATION MANUAL
TRANSMILLE LTD. Version 3 : Jun 2014
Page 18
5.
Press
and measure the output ‘Zero Calibration’.
6.
To adjust the output, type in the measured value using the keyboard, followed
by the ‘ENTER’ key i.e. 0.00028mV
7.
The output can also be adjusted by moving the ‘cursor’ to the required digit
and adjusting the output using the up / down arrows or the digital control
8.
The ‘SHIFT’ key will illuminate to indicate that a change has been made
to the calibration of the instrument, however has not yet been stored.
9.
To undo the adjustment before storing the changes, press the
UNDO
soft key.
This will remove any changes that have been made to the output of the
calibrator.
SHIFT
OUTPUT
ON
0
•
0
0
0
2
8
ENTER
