Transcell Technology TI-1680 Скачать руководство пользователя страница 34

Страница: 34 / 47

Truck In – Store keyboard tare weight

NOTE: First make sure F38 (permanent tare) is set to ‘1’

With the truck on the scale, press the F1 key. “Ent Id” will be displayed.

Use the 0-9 keys to key-in an ID number and then press the Tare key.
The indicator will display “In” and “TArE”.

Press the Enter key. The indicator will display “Ent tr”.

Use the 0-9 keys to key-in the tare weight and then press Enter. The tare weight is now saved.

If a printer is connected, a ticket will automatically be printed.

Truck In - Store current weight as the tare weight

NOTE: First make sure F38 (permanent tare) is set to ‘1’

With the truck on the scale. Press the F1 key. “Ent Id” will be displayed.

Use the 0-9 keys to key-in an ID number and then press the Tare key.
The indicator will display “In” and “TArE”.

Press the Tare key. The indicator will display the current weight.

Press [Enter]. The indicator will display “SEt”. The tare weight is now saved.

If a printer is connected, a ticket will be printed.

Truck Out - Using Stored Tare Weight

NOTE: First make sure F38 (permanent tare) is set to ‘1’

With the truck on the scale, press the F1 key. “Ent Id” will be displayed.

Use the 0-9 keys to key-in an ID number and then press the Enter key.
The indicator will display “Out”.

If a printer is connected, a ticket will be printed.

LEGAL FOR TRADE SEALING

Indicators can be sealed for commercial (Legal for Trade) applications as follows.

1. On the back of the indicator, locate the setup/calibration switch cover.

2. Thread a wire security seal through both drilled head screws securing the calibration switch cover

as well as the single drilled head screw holding on the rear panel.

Содержание TI-1680
















































Результаты поиска

Содержание TI-1680

Отзывы:

Похожие инструкции для TI-1680

Бренды по названию

Популярные бренды

Transcell Technology TI-1680, Руководство по установке и эксплуатации

Результаты поиска

Содержание TI-1680

Отзывы:

Похожие инструкции для TI-1680

Бренды по названию

Популярные бренды