13
USER MENU PROCEDURES
This section provides instructions for all of the User Menu procedures.
Set Time (A6)
Your indicator will keep track of the current time for you, which can then be printed on the print ticket.
Use this procedure to set the time, which must be entered in military (24-hr) format. For example, for
9:00 AM, you would enter 09.00.00. For 5:00 PM, you would enter 17.00.00.
1. While in the User Menu mode, scroll to "A 6", and then scroll down once using the ZERO key to
enter the set time menu. The display will momentarily show "ENT TI", followed by the time
(hh.mm.ss) currently set on the machine.
2. If the displayed value is correct, simply press the ENTER or C/CE key to exit this mode without
saving any changes.
3. If the displayed value needs to be changed, first press MODE (Set). The display changes to all
zeroes (00.00.00).
4. Use the front panel numeric keys to key-in the new time and then press ENTER. If you make a
mistake, use the C/CE key as a backspace key. The display will show "Set" momentarily, and
then revert back up to "A 6".
NEW for version 2.5 and higher: it is no longer necessary to enter the User Menu to set the time. Simply press
and hold the ENTER key while powering up the unit and then follow directions are written above.
Set Date (A7)
Your indicator will keep track of the current date for you, which can then be printed on the print ticket.
Use this procedure to set the date, which must be set in mm/dd/yy format. For example, for January
7, 2010, you would enter 01.07.10. For November 30, 2010 you would enter 11.30.10.
1. While in the User Menu mode, scroll to "A 7", and then scroll down once using the ZERO key to
enter the date entry menu. The display will momentarily show "ENT DT", followed by the date
(mm.dd.yy) current set on the machine.
2. If the displayed value is correct, simply press the ENTER or C/CE key to exit this mode without
saving any changes.
3. If the displayed value needs to be changed, first press MODE (Set). The display changes to all
zeroes (00.00.00).
4. Use the front panel numeric keys to key-in the new date and then press ENTER. If you make a
mistake, use the C/CE key as a backspace key. The display will show "End DT" momentarily,
and then revert back up to A7.
NEW for version 2.5 and higher: it is no longer necessary to enter the User Menu to set the date. Simply press
and hold the ENTER key while powering up the unit and then follow directions are written above.
