Transcell Technology TI-1680, Руководство по установке и эксплуатации

Страница: 11 / 47

8
CODE/NAME DESCRIPTION SELECTION LIST
F11
Custom Unit
Multiplier Actuates the function that allows you to enter a multiplier for the
custom unit., i.e. the conversion factor that you would divide the
calibration unit by in order to obtain the custom unit of weight.
Pressing the ZERO key to scroll down one level begins the
sequence. Key-in
0.0001 - 1000
1.0 (NA/€)
F14
Units
Conversion Allows the UNITS key to be disabled so that an operator cannot
accidentally press the key and change the displayed units.
"0" = Disable the Units key "1" = Enable the Units key
0 (€)
1 (NA)
F15
Third Unit
Selection Selects the third unit to appear after lb and kg when toggling the
UNITS key.
"0" = No Third Unit, "1" = Grams, "
2" = oz, “3” = custom unit
0
√ √√ √
(NA/€)
0-3
F16
Zero
Calibration Places indicator into the zero calibration routine. Scrolling down with
the ZERO key one level begins the procedure. Press ZERO key
to begin sequence
F17
Span
Calibration Places indicator into the span calibration routine. Scrolling down with
the ZERO key one level begins the procedure. Press ZERO key
to begin sequence
F18
View
Calibration Actuates the function that allows you to view both the zero and span
calibration value. The values displayed in this function are valid only
after Calibration (F16 & F17) has been successfully completed.
Scrolling down with the ZERO key one level begins the procedure.
Multi-point cal Press ZERO key
to begin sequence
F19
Key-in Zero Allows you to key-in known zero calibration value in case of memory
loss in the field. Scrolling down with the ZERO key one level begins
the procedure. Press ZERO key
to begin sequence
F20
Key-in Span Allows you to key-in a known span calibration value in case of
memory loss in the field. Scrolling down with the ZERO key one level
begins the procedure. Press ZERO key
to begin sequence
F21
Factory Reset
North America This sub-menu will reset all parameters in the “F” and “A” menu to the
default settings for North America. USE WITH CAUTION!
“tF” message means ‘busy – please wait’ Press the ZERO
key twice to
execute.
F22
Factory Reset
Europe This sub-menu will reset all parameters in the “F” and “A” menu to the
default settings for Europe. USE WITH CAUTION! “tF” message
means ‘busy – please wait’ Press the ZERO
key twice to
execute.
F23
Fine Tune
4-20 mA Actuates the function that allows you to fine-tune the optional
4-20 mA analog output. Pressing the ZERO key to scroll down one
level begins the sequence. Press the ZERO
key to begin
sequence