25
ADVANCED SCALE OPERATION
APPLICATION (F30) SUMMARY
The following table summarizes the various parameters and operation for each application programmed in the F30 setup menu:
F30
Set Point key
Over/Under Keys
Output Function
* key operation
F1 key operation
Gross/Net/Tare (0)
Active (4)
Not active
Standard Outputs
No function
No function
Accumulator (1)
Not active
Active (1) (total weight)
Checkweighing Outputs Trans counter, Gross Total, Net Total
Print Total & Clear
Remote Display (2)
Not active
Not active
Not active
Not active
Not active
Piece Counting (3)
Not active
Active (1) (Pieces)
Checkweighing Outputs APW
Sample
Percentage (4)
Not active
Active (1) (%)
Checkweighing Outputs Target
Sample Target
Hold (5)
Not active
Active (1) (Weight)
Checkweighing Outputs No function
Activate Hold
Checkweighing (6)
Not active
Active (1) (Weight)
Checkweighing Outputs No function
Target Weight
Batching (7)
Active (4)
Not active
See Batching section
No function
Start/Stop Batch
Weigh in/out (8)
10
Not active
Clear ID’s
Not active
Not active
Enter Truck ID #
10
Appears on Version 2.4 and above only
