9
CODE/NAME
DESCRIPTION
SELECTION LIST
F30
Special
Application
Used to select one special application feature, subject to local legal
requirements.
“0” = None (Gross/Net), “1” = Accumulation, “2” = Remote Display,
“3” = Piece Count, “4” = Percentage
1
, “5” = Hold,
“6” = Checkweighing, “7” = Batching, “
8” Truck Weigh In/Weigh Out
2
0
√
√√
√
(NA/€)
0 - 8
F31
Gross Zero
Band
Selects the range within which the scale will automatically clear the
tare and switch to Gross mode. Note that the scale must be in
standstill. Selections are in display divisions (d). Scrolling down with
the ZERO key one level begins the procedure.
“0” = Disabled
Key-in
0 - 10
0 (NA)
10 (€)
F32
Center of Zero
Band
Selects the range around gross zero within which the scale will
display the Center of Zero annunciator. Selections are in display
divisions (d).
0.25d (US)
0.5d (€)
F34
Auto Print Min.
Weight
Selects the minimum weight at which the auto print function will work
if enabled. Selections are in display divisions (d). Scrolling down with
the ZERO key one level begins the procedure.
“0” = Disabled
Key-in
0 - 100
1 (NA/€)
F35
Hold Mode
Selects the “Hold” mode operation. See Operation section for more
details.
“1” = Automatic Hold, “2” = Manual, “3” = Peak Hold
1
2
3
√
√√
√
(NA/€)
F36
Percentage
Hold Wt
Allows you to select the percentage (of the displayed held value) of
weight change before the scale automatically unlocks the held weight
and relocks onto the new weight. If F35 is set to “0”, this function
does nothing.
Key-in
0 – 100 %
10 (NA/€)
F37
Min. Hold Wt
Sets the minimum weight that can be captured and held; expressed
in display divisions (d). If F35 is set to “0”, this function does nothing.
1, 2, 5
√
√√
√
(NA/€),
10, 20, 50, 100,
200, 500, 1000
F38
Permanent
Tare
2
Allows a TARE to be stored with an ID number. Used for the Truck
Weigh In/Weigh Out application.
"0" = Disable "1" = Enable
0
√
√√
√
(NA/€)
1
F39
Set Point
Password
3
Allows the Password prompt to be disabled so that an operator need
not enter one in order to program in a new Set Point value.
"0" = Disable the prompt "1" = Enable the prompt
0
1
√
√√
√
(NA/€)
1
Appears on Version 2.34 and below only
2
Appears on Version 2.4 and above only
3
Appears on Version 2.5 and above only
