Page C-1
APPENDIX C: ERROR MESSAGES
C.1
ERROR MESSAGES
If the scale encounters an error condition, it will display a message alerting the operator. A
description of each display follows:
C.1.1
OPERATOR ERRORS
Message
Explanation
Maximum Scale Weight
Exceeded
Indicates that the weighing capacity of the selected
scale has been exceeded.
Not Enough Resolution
Indicates that there is not enough internal resolution to
calculate the unit weight of an item. This means that
the items you are counting are too light for the scale to
process at all.
Unit Weight too Light
Indicates that unit weight of the items you are sampling
or manually entering is too light for the scale to
process accurately.
Sample Weight too Light
Indicates that total weight of the items you are
sampling is too light for the scale to process
accurately.
Invalid Tare Value Entered
Indicates that the tare weight value you are entering is
not rounded to the nearest scale division. For example,
you cannot enter 0.01 lb for a 0.05 lb increment scale.
Value Exceeds the Scale
Capacity
Indicates that the tare weight value or unit weight value
you are entering exceeds the capacity of the scale.
Remote Scale Error – Cannot
Switch
Indicates that there is a problem with the remote scale
or the remote scale has been disconnected.
Remote Scale Disabled
Indicates that the remote scale is disabled. Occurs
when you press the Local / Remote key.
No Such ID in System
Indicates that the ID number you have entered or
scanned does not exist in the scale.
No Pieces for Accumulating
Occurs when you press the M+ soft key with nothing
on the scale platform.
