Page 5-2
To access the Configuration sub-menu, follow the instructions below.
1.
Enter the Supervisor Menu as described above. The scale prompts for the area to
setup.
2.
Press the Config soft key. The Configuration sub-menu items are listed above the six
soft keys. Press the More or Back soft keys to see more choices.
3. Press the soft key pertaining to the item you wish to modify. The scale shows the
current status or selection of that item in the form of a highlighted soft key text.
4. Press the soft key corresponding to the desired status then press the ENT key. You
may exit this screen without making changes by pressing the CLR key.
5. Repeat steps 3 and 4 above until the configuration is complete.
6. Press the CLR key twice to return to normal operating mode.
5.2.2 PRINT FORMAT SUB-MENU (PrtFmt)
This function is used to configure how the information appears on your printer. This sub-
menu consists of Margin, Header, Starting Characters, Ending Characters and Field
Selection.
1. Enter the Supervisor Menu as described above. The scale prompts for the area to
setup.
2. Press the PrtFmt soft key. The Print Format sub-menu items are listed above the six
soft keys.
5.2.2.1
MARGINS (Margin)
This function is used to configure the left margin on your printer. To use, enter the
number of spaces to be printed prior to a line of information. The default setting
varies according to the device selected for COM1.
1. Enter the Print Format sub-menu as described above.
2. Press the Margin soft key. The scale displays the current setting.
3. Use the numeric keys to enter in the new value and press the ENT key or just
press the CLR key to keep the current value.
5.2.2.2
HEADER (Header)
This function allows three alphanumeric messages to be printed at the top of each
printout. For example, your company name and address can be entered and
printed. A maximum of 38 characters may be entered for each message. The
default header messages can be found in Appendix B.
1. Enter the Print Format sub-menu as described above.
2. Press the Header soft key. The scale displays a message setup screen for the
first message (MSG1).
3. Use the numeric keys 2 and 8 to change the character at the cursor. Use the
numeric 4 and 6 keys to move the cursor left and right.
4. When finished with your message, press the ENT key. The scale asks you to
confirm the changes. Press the Yes soft key to save the changes or the No
soft key to exit without saving.
5. Repeat Steps 3 and 4 for Message 2 (MSG2) and Message 3 (MSG3).
