Trannergy TRM025KTL, Руководство пользователя, Страница: 25 / 39

24 User Manual
Figure 5-6 Language and Time Setting
Language setting
When the cursor is at the “Language” column, you can choose “Chinese”, “English” or “German” etc,
and then press “enter”, you can confirm “Language” setting.
Date setting
When the cursor is at the “Date”, at first you can set the “Year” by pressing the “up” and “down”
keys. After finishing setting year, please press the “down” key and move to “Month”, press the “enter”
key to confirm setting. set month also by pressing the “up” and “down” keys. Press the “enter” key to
finish “Month” setting ,After that, press the “down” key to “Date”, set date also by pressing the “up”
and “down” keys. Later, press “enter” and you can finish t “Date” setting.
Time setting
When the cursor is at the “Time”, at first you can set “Hour” by pressing the “enter” key and then
pressing the “up” and “down” keys, at last, pressing “enter” key to finish setting; When finishing
setting the hour, please press the “down” key to “Minute”, set minute also by pressing the “enter” key
and then pressing the “up” and “down” keys. at last, pressing “enter” key to finish setting. And then
press the “down” key to “second”, set second also by pressing the “enter” key and then pressing the
“up” and “down” keys , at last, pressing “enter” key to finish setting. Finally, please press “OK”.
Notes:
After setting the “Language”, “Date” and “Time”, press the “down” key to “ok”, and then
press “enter” to save setting. If pressing “esc” to discard setting.
5.4.1.2. Safety Parameters Setting
pressing the
“
enter” key, you will find a pull-down menu. Please move the cursor to “Safety
Parameters” menu by pressing the “up” or down” key, and then press “enter” key, you will come to
the interface for “Safe Parameter”. At this interface, you can choose the last or the next parameter, or
increase or decrease the parameters. These parameters contain “Safety”, “Vpv-Start”, “T-start”,
“Vac-Min”, “Vac-Max”, “Fac-Min”, “Fac-Max” and so on.
Notes: This operation step requires password (default value: 1001).