manualshive.com logo in svg

Trane Adaptive Frequency VFDB, Инструкция по установке, эксплуатации и обслуживанию

Поделиться
Скачать
Trane Adaptive Frequency VFDB Скачать руководство пользователя страница 59

AFDJ-ADF001C-EN

3

Upon receiving this check list, the Rockwell MVCOE group will contact the site to finalize arrangements for a start-up 
engineer to travel to site. The field service agency and Rockwell are to also coordinate the visit with La Crosse CTV 
Technical Service.

PowerFlex “A” or “B” Frame Pre-Commissioning Check List

Please complete (print) this 

Pre-Commissioning Check List

 and when complete, fax or e-mail to Rockwell and Trane 

(contact information provided on preceding page):

1. Receiving and Unpacking

Required:

Specify Language for Warning Labels!  _______________________________________________

FROM: Date: 

Name: 

Trane Service Company: 

Pages: 

Trane Regional Fax: 

Rockwell Regional E-mail: 

Trane Regional E-mail: 

Trane Chiller Serial Number:  ______________________________________________________________________

Trane Chiller Sales Order Number: __________________________________________________________________

MV Drive Serial Number:  _________________________________________________________________________

Rockwell GMS Service Engineer Requested (YES):  _____________________________________________________

Scheduled Commissioning Date

(a)

: _________________________________________________________________

(a) Important: 

The average start-up by Rockwell takes approximately three days to complete.

Rockwell requires four weeks notice to make arrangements.

Initials

Date

The drives have been checked for shipping damage upon receiving.

Check the shock indicator; call Trane Service and Rockwell support to notify if damaged.

After unpacking, the item(s) received are verified against the bill of materials.

Any claims for breakage or damage, whether concealed or obvious, are made to the carrier by 
the customer as soon as possible after receipt of shipment. Any claims shall be issued according 
to local legislation.

All packing material, wedges, or braces are removed from the drive.

Содержание Adaptive Frequency VFDB

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды