Section 5: Diagnostics
Operator Manual
Doc. No. 101205
5
.
1
SECTION 5: DIAGNOSTICS
5.1 DIAGNOSTICS MENU
The ATM features built-in diagnostics features to assist you in troubleshooting any
problems that may develop. Below is the main diagnostics menu.
NOTE:
Some of the features in the Diagnostics menu may not be available
depending on model of MiniBank.
INITIALIZE
This test will cause the ATM to run its Initialization test. This is the same test
performed automatically every time you power on the ATM. If an error is detected it
will appear under the Test Count on the screen. To run the Initialization test press
the Initialize button.
RECEIPT PRINTER
This test will print a test receipt. If the test is successful you should receive a receipt
with three sets of sample characters for each time the test is run. You can use the
<Clear> button to set the number of times you want this test to run (if you enter a
zero for the count the test will run until you stop it by pressing <Cancel> ).
CASH DISPENSER
This will test the ability of the cash dispenser to pull a note from one or both
cassettes and send it to the reject bin. You can choose from the first cassette,
second cassette or both cassettes at once. You can use the <Clear> button to set
the number of times you want this test to run (if you enter a zero for the count the
test will run until you stop it by pressing <Cancel>).
NOTE:
You must have bills entered into Settlement before running this test.
