Section 3: Programming
Operator Manual
Doc. No. 101205
3.22
3.4.3 OPTIONAL FEATURES
The ATM offers 2 optional functions to improve performance and keep the ATM
functional in the event of a paper problem (jam, out of paper etc.) These are Pre-
dialing and Selective Receipt.
PRE-DIALING
With this feature enabled the ATM will begin to dial out to the processor as soon as a
customer swipes their card. This will save considerable time for each transaction.
With the option disabled, the ATM will begin dialing after the customer has chosen a
transaction type and selected an amount.
To enable this feature, choose Optional Function from the Customer Setup Menu.
Next select Pre Dialing, the lower portion of the screen will display if the option is
enabled or disabled.
SELECT RECEIPT
This feature allows the ATM to complete transactions even though it may not be able
to dispense a receipt. If the ATM experiences a paper jam, or runs out of paper, the
customer will be asked if they would like to complete the transaction even though
they will not receive a receipt. If the customer answers Yes, the transaction will
continue. Following the transaction the customer’s information (what would have
appeared on the receipt) will display on the screen. The ATM will continue to operate
without use of the printer until someone accesses the Operator Function menu. At
that time the error must be corrected before the ATM will go back into service.
To enable the option, press Select Receipt, the lower portion of the screen will
display the options status.
