Tranax Mini-Bank 1500 Скачать руководство пользователя страница 29

Страница: 29 / 102

Section 3: Programming

Operator Manual

Doc. No. 101205

3.16

3.3.5 CHANGE PASSWORDS

The ATM uses three passwords to provide security to the operator menu system.

These are Operator, Service and Master.

•

Operator Password (allows access to basic menu structure)

•

Service Password (allows access to basic and diagnostic menus)

•

Master Password (allows access to all menus including setup parameters)

The operator password can be changed by anyone with the current operator

password. The service and operator passwords can be changed by anyone with the

service password. The master password can only be changed by someone with the

current master password. Any password can be changed using the master

password.

For example, if you have lost the operator or service password, you can use your

master password to change them. Simply enter the master password when it

requests the operator or service password and then enter the new password.

To change a password, press the button for the appropriate password and you will be

prompted to enter the “current” password. After entering the current password you

will be prompted to enter the new password and then enter it a second time to

verify. If you forget your password please contact your dealer or distributor for

service.

WARNING:

All passwords MUST be 6 digits. If you use a password that is less

than 6 digits, the passwords may default back to factory if the machine is power

cycled. If your customer wants a 4 or 5 digit password, add zeros to the end to

make it 6 digits.

Содержание Mini-Bank 1500







































































































Результаты поиска

Содержание Mini-Bank 1500

Отзывы:

Похожие инструкции для Mini-Bank 1500

Бренды по названию

Популярные бренды

Tranax Mini-Bank 1500, Руководство оператора

Результаты поиска

Содержание Mini-Bank 1500

Отзывы:

Похожие инструкции для Mini-Bank 1500

Бренды по названию

Популярные бренды