Tranax Mini-Bank 1500 Скачать руководство пользователя страница 102

Страница: 102 / 102

Appendix D: Advertisement Graphics

Operator Manual

Doc. No. 101205

D.9

Cable Upload

To upload a graphic directly at the ATM using a PC and download cable, do
the following steps.

For Mini-Bank™ ATMs with BIOS ver LESS than V10.xx.xx

To download directly at the ATM requires a PC, the CDOWN6.EXE
application and a special Tranax download cable.

Connect the PC to the to the 9-pin serial port located on the front of
the ATMs mainboard (behind the LCD panel)

Turn off the ATM, then hold down the [Enter] key on the ATM keypad

while turning the ATM back on. This will place the ATM in “download
mode”

Both the CDOWN6.EXE and the converted image (ie M_PCX1.PCX) files
need to be in the same folder, located somewhere on your hard drive

that you can access from a DOS prompt.

Open a DOS prompt and change to the directory where these files
exist.

Type CDOWN6<space>1<space>8 and press [Enter] ( <space> =
press the space bar)

If the proper cable was attached correctly, the program should be

counting up in hexadecimal and displaying the file being loaded.

When the file has uploaded, power off the ATM and power on.

For Mini-Bank™ ATMs with BIOS V10.xx.xx and greater (Cashworks)

To download directly at the ATM requires a PC, the DOWNLOAD.EXE
application and a special Tranax download cable.

Connect the PC to the to the 9-pin serial port located on the front of
the ATMs mainboard (behind the LCD panel)

Turn off the ATM, then hold down the 3rd button down, right side of

the LCD panel while turning the ATM back on. This will place the ATM
in “download mode”

Both the DOWNLOAD.EXE and the converted image (ie M_PCX1.PCX)
files need to be in the same folder, located somewhere on your hard

drive that you can access from a DOS prompt.

Open a DOS prompt and change to the directory where these files
exist.

Type DOWNLOAD<space>1<space>(B through H depending on what
image number) and press [Enter] ( <space> = press the space bar)

If the proper cable was attached correctly, the program should be
counting up in hexadecimal and displaying the file being loaded.

When the file has uploaded, power off the ATM and power on.

Содержание Mini-Bank 1500







































































































Результаты поиска

Содержание Mini-Bank 1500

Отзывы:

Похожие инструкции для Mini-Bank 1500

Бренды по названию

Популярные бренды

Tranax Mini-Bank 1500, Руководство оператора

Результаты поиска

Содержание Mini-Bank 1500

Отзывы:

Похожие инструкции для Mini-Bank 1500

Бренды по названию

Популярные бренды