Tranax Mini-Bank 1500 Скачать руководство пользователя страница 20

Страница: 20 / 102

Section 3: Programming

Operator Manual

Doc. No. 101205

3.7

Successful entry of both passwords will grant access to the Key Management screen.

From the moment the Key Management area is entered, a 5 minute timer begins. At

the end of 5 minutes, regardless of what you are doing (entering a master key for

example) the Key Management area times out and you will be taken back to the Host

Setup menu.

KEY MODE

This option sets the type of master key you will be loading (TDES, DES, MAC etc.)

Refer to Addendum C for Key Mode descriptions and instructions.

MASTER KEY INDEX

The ATM will hold up to 16 individual Master Keys. Check with your processor to find

if they are expected to be at a certain location. For example Coredata is always

installed at index #9, most other processors are installed at index #0 or #1. The

ATM will only use the key that the index is set to regardless of how many keys are

installed. To set the index simply press the button labeled Master Key Index and

then enter the number you want it set to (enter as a 2 digit number ... 00, 01, 02,

10, 11 etc.) press Enter when done. Press Check Master Key to see a list of

currently installed keys.

CHECK MASTER KEY

This will show the list of available master keys and their appropriate checksums. The

checksum is a 4 digit number calculated from the two 16-digit numbers of your

master key that provides a means to verify the master key is correct. When your

processor provides your Master Keys, they will also give you the 4 digit checksum. If

after entering your Master Key this checksum does not match, try reentering your

master keys or contact the processor.

EDIT MASTER KEY

This is where you enter your two 16-digit Master Keys (provided by your processor).

After pressing Edit Master Key, you will be prompted to enter an index where you

want this key stored. If you do not know which index to use, contact your dealer or

processor.

NOTE:

Because of the MiniBank 1500’s Encrypted Pin Pad, you do NOT use the LCD

buttons to enter the letters for the master key. Please refer to the Appendix

included with the manual for entering master keys.

Содержание Mini-Bank 1500







































































































Результаты поиска

Содержание Mini-Bank 1500

Отзывы:

Похожие инструкции для Mini-Bank 1500

Бренды по названию

Популярные бренды

Tranax Mini-Bank 1500, Руководство оператора

Результаты поиска

Содержание Mini-Bank 1500

Отзывы:

Похожие инструкции для Mini-Bank 1500

Бренды по названию

Популярные бренды